Cemented carbide has high hardness, strength, wear resistance and corrosion resistance, is known as "industrial teeth", used to manufacture cutting tools, knives, cobalt tools and wear-resistant parts, widely used in military industry, aerospace , Mechanical processing, metallurgy, oil drilling, mining tools, electronic communications, construction and other fields, with the development of downstream industries, the demand for cemented carbide market continues to increase. And the future of high-tech weapons and equipment manufacturing, the advancement of cutting-edge science and technology and the rapid development of nuclear energy will greatly increase the demand for high-tech content and high-quality stability of cemented carbide products.
•Can Tooling •Wire Manufacturing •Compacting Dies and Punches •Tube Manufacturing •Compacting Core Rods •Cap and Closure •Powdered MetalTooling •Custom Tool SteelTooling •Textile Wear Parts •Oil and Natural GasWear Parts ·Ceramic CompactingDies •High Impact ExtrusionTooling •Slitting and ShearKnives •Automotive •Other
•Tungsten Carbide Components •Tungsten Carbide Dies & Molds •Tungsten Carbide Rollers •Tungsten Carbide Bushing •Tungsten Carbide Punch & Pin •Tungsten steel ball valve •Ceramic parts •Tungsten Carbide Nozzles •Tungsten Carbide Bearings •Tungsten Carbide Machined Parts •Tungsten Carbide Seal Rings •Tungsten Carbide High Pressure PumpComponents
•Mud Deflectors •Valve Seats and Stems •Rotors and Stators •Erosion Sleeves •Flow Restrictor Bearings •Main Pulser Components •Orifices •Solid Carbide or Two-Piece Threaded Nozzles •Seal Rings •Ported Flow Cages •Thrust Bearings
DRILLING COMPONENTS
•Stratapax Cutters •Mud Nozzles •Solid Carbide ThreadedMud Nozzles •Cutting Bits •Mud Motor Bearings
CHOKE AND TRIM COMPONENTS
•Flow Control Components •Gates and Seats •Bushings
HIGH PRESSURE PUMP COMPONENTS
•Solid Carbide and Ceramic Plungers •Nozzles •Seats and Stems •Flow Tubes
Drawing Dies,Carbide Forging Die,Carbide Composite Roll,Carbide Point Punches Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com
Some parts of the forklift scale are still relatively delicate, so try to avoid excessive bruising when moving.
If the forklift often needs to transport objects frequently, it will often rise and fall. The process is very likely to cause the problem of heavy hops or instability. If this problem arises, then we should check more if the upper lid and the lower scale are touching. If it touches, it is a cause of failure. We can remove the lid and check it. In addition, we need to see whether the sensor is equipped with gaskets, and whether the sensor height is sufficient; if the sensor height is not enough, we should start the solution (the common solution is to install the gasket is best to solve, but do not rule out other better methods) in order to maintain There is a certain gap between the upper and lower scale covers.
If we see that the forklift's scale itself has been pressed by a heavy object for a long time, this phenomenon should be stopped immediately. This is very unfavorable for the forklift scale itself. In addition, there is an overload phenomenon, which is common in some companies due to lack of basic knowledge of workers weighing, this will directly affect the life of forklift scales.
If the forklift scale is not the same in the four corners when weighing, how to do it if the repeatability is inconsistent? When this problem is encountered, we must first check whether the screws fixing the sensor are loose. If the screws are loose, we need to tighten the screws; then check whether the steel plate of the forklift and the beam are deformed. If there is any deformation, correction or direct replacement is required. . If the above problems are not solved, then the proposal is still asked by relevant professionals to solve it.
CUSTOM Tungsten Carbide Tooling
WEAR PARTS AND SPECIALTY COMPONENTS
OIL AND NATURAL GAS WEAR PARTS
Now many manufacturers of workshops, warehouses will use stainless steel electronic forklift scales, it is small and flexible, not only to facilitate the transport of goods, but also directly weigh the weight of goods in the handling, is a very easy to use, practical electronic scales. When we use a forklift scale everyday, we need to pay attention everywhere.