Model NO.: VLF-70
HS Code: 9030339000
The VLF testers (Generator) are suitable for
Testing cables, transformers, switchgear,
Rotating machinery, and other
Electrical apparatus.

Vlf High Voltage Generator 70kv

VLF Advantage
1. Easiest to use Fully automatic microcontroller
2. Built-in printer
3. True sine wave output
4. Real-time display of actual output waveform
5. Ergonomic, menu guided, large backlit LCD
6. Storage of test results for later retrieval and print.
7. Over voltage and current protected
8. Variable frequency 0.1Hz, 0.05Hz, 0.02 Hz
9. Data of current, voltage and waveform directly sampled at HV side.
10. AC testing does not degrade good cable insulation
11. Harmful space charges are not injected into the cable insulation
12. No traveling waves are generated during testing
13. Rugged and reliable design less prone to failure from transients

Safety Features
1. Short circuit protected.
2. Status display of all important safety functions and messages.
3. Safe, easy to use operation with emergency off and key switch lock-out.
4. Fully integrated discharge circuit to safely ground the DUT after testing.
5. Zero start interlock.
6. Zero voltage switching.

Vlf High Voltage Generator 70kv

Specifications
1. Input: 110/220 ± 10% Volts AC, 50/60 Hz, single phase.
2. Output-Voltage: 70KV
3. Output frequency: 0.1Hz, 0.05Hz, 0.02Hz.
4. Stability of frequency: Fluctuation < 0.5%
5. Measurement accuracy: ± 3%.
6. Positive and negative voltage peak errors: ≤ 3%.
7. Voltage waveform distortion: ≤ 5%
8. Construction: In two units: Controller and Booster...
9. Ambient conditions of use: Temperature Indoor and outdoor: -10 to + 50ºC.
10. Humidity: ≤ 85%.

Model 		 Output
Voltage/Current
(Peak)		 Load Capacity Control Unit Booster Fuse 
Frequency/Capacitance Net Dim.
(cm)		 Net Wt
(kg)		 Net Dim.
(cm)		  Net Wt
(kg)
VLF-30/1.1  30KV/29mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		 28×37×22 5 33×18×34 25 8A
VLF-40/1.1  40KV/29mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		 28×37×22 5 35×20×36 45 8A
VLF-50/1.1  50KV/59mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		  28×37×22 5 37×24×39 45 10A
VLF-60/1.1  60KV/59mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		  28×37×22 5 33×18×34
33×18×34		 25+45 20A
VLF-70/1.1  70KV/59mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		  28×37×22 5  33×18×34
35×20×36		 25+45 20A
VLF-80/1.1   80KV/59mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		 28×37×22 5 33×18×34
37×24×39		 25+45 20A
VLF-90/1.1   90KV/59mA    0.1Hz ≤ 1.1uF
   0.05Hz ≤ 2.2uF
   0.02Hz ≤ 5.5uF		 28×37×22 5 33×20×35
37×24×39		 30+45 20A

Vlf High Voltage Generator 70kv

Vlf High Voltage Generator 70kv

Vlf High Voltage Generator 70kv

Vlf High Voltage Generator 70kv
 

Niobium Carbide Welding Wire

Niobium Carbide Welding Wire (1)

Niobium Carbide Welding Wire (2)

Niobium Carbide Welding Wire Produces Super Hard Overlay As The Best Wear Solution.

We offer welding wires for low, medium and high alloy hardfacing, for mild steel fabrications, Diameters range from 1.2 mm to 4.0 mm, using our own manufacturing technology. In addition to cored wires, our range of consumables includes tubular welding electrodes.

HP Welding manufactures an extensive range of flux cored and metal cored hardfacing consumables. We offer welding wires for low, medium and high alloy hardfacing, which provide the ultimate protection against various types of wear, including abrasion, erosion, impact, mechanical fatigue, and more.

Our range of hardfacing welding wires dedicated to increasing abrasion resistance. Flux cored wires and metal cored wires suitable for increasing wear resistance of parts such as screw conveyors, fans, equipment used in agriculture & mining, grinding mills, vertical mills, screws, blades, ventilators and more.

HP Welding manufactures a range of flux cored welding wire and metal cored welding wire for different cladding applications to increase wear resistance. With our cladding wires, you will prevent wear problems from abrasion, impact, temperature, corrosion and errosion and increase the service life of your parts.

HP Welding wire could make the ultra-hard deposit offering extremely high resistance to abrasion under high stresses and moderate impacts

HP Welding wire can be well applied for screw conveyors, riddles for hot materials, fans, crushers, etc.

HP Welding wire forms the ultra-hard deposit offering highest resistance to abrasion which contains boron carbides of extreme hardness

Niobium Carbide Welding Wire,ESAB Welding Wire,FCAW Welding Wire, Nb Flux Cored Welding Wire,Open Arc Welding Wire

HuiFeng Wear Resistant Group , https://www.hpwearsolution.com