Marine Mooring Floating Buoys l        Core  l        Skin l        Steelwok and end assembly Evergreen can make buoyancy material used for subsea up to 7000m. Product of different opplications buoyancys are manufactured upon our advance subsea buoyancy material. We can make subsurface mooring buoys , cable float, pipeline buoys, ROV buoyancy module , special buoys, and other synmatic foam products. Our high-performance subsea buoyancy material and synmatic foam have the following performance. Item Unit Value 500m 1000m 1500m 4500m Density g/cm³ ≤0.4 ≤0.45 ≤0.5 ≤0.6 Compressive Strength MPa ≥5 ≥10 ≥15 ≥40 Hydrostatic Pressure MPa ≥5 ≥10 ≥15 ≥37 Water Absorption % ≤2(5MPa,24h) ≤2(10MPa,24h) ≤2(15MPa,24h) ≤2(40MPa,24h)
Plastic Jar Food Blenders
We have a full range of plastic jar food blenders, including 1L, 1.25L, 1.5L, 1.6L plastic jar food blenders with grinder. Plastic jar also have different materials, PS jar, AS jar and PC jar. Plastic jar blenders usually with 300/350W 7020 or 7025 motor.
Discription of Plastic Jar Food Blenders
Size: 1L, 1.25L, 1.5L, 1.6L
Material: PS, AS, PC unbreakable jar
Controls Type: Rotary switch, push button
Plastic Jar Food Blenders,Plastic Jar Blenders,Blender Food Processor,1.5L Blender Flying Electronic Co., Ltd , https://www.flyingappliances.com
The core is manufactured by batching up the resilient closed cell polyethylene or EVA foam and uniformly and continuously thermolaminating each layer together. The method ensures a bond stronger than the foam itself and eliminates the use of adhesives which can break down under long use. Useing of a polyethylene foam core ensure the buoy will not absorb water even if the skin is punctured, increasing the lifespan of the product and reducing maintenance costs. The resilient material makes the buys self fendering with a high impact absorption capacity.
The core is encapsulated with a skin of high performance polyurethane elastomer, spray applied. Polyurethane elastomer is selected for the skin because of its high resistance to abrasion, fatigue and ultra violet degradation and is significantly more durable than polyethylene materials used in the construction of rotationally moulded buoys.
Comprising through central steel tube with longitudinal gussets and external load distribution flanges at each end. A swivel assembly, certified 10 tonnes SWL, with bows at each end passes through the central tube.Â
All the material of swivel assembly are hot dip galvanized. Steelwork to be coal tar epoxy painted.
Subsea Buoyancy
Model NO.: YT
Trademark: Evergreen Maritime
Origin: Shandong, China