Customized Nitrogen Generator For Laser Cutting
High power fiber laser cutting equipment
has many common pain points in different cutting and processing scenarios of
sheet metal:
Using oxygen for cutting thin carbon steel
has slow efficiency and is prone to slagging.
The cutting cost of carbon steel with
liquid nitrogen is high, and the cutting surface is rough; Severe slag sticking
on medium and thick carbon steel; unable
to cut thick carbon steel
Severe slag accumulation during air cutting
of carbon steel increases polishing costs
Using oxygen to cut carbon steel requires
high requirements for the sheet metal, with multiple oxidation layers, severe
rust, and materials that all affect the stability of cutting quality
Cutting a large amount of stainless steel
or carbon steel with air can easily cause contamination of optical lenses
Using liquid nitrogen to cut aluminum plate
has severe slag hanging and poor cross-sectional quality.
In order to ensure cutting efficiency and
effectively reduce cutting costs, Suzhou Xinrui Purification Equipment Co., Ltd.
has launched two types of laser cutting specialized nitrogen production
devices, PSA nitrogen generators and membrane nitrogen generators, after years of dedicated research
and development and extensive process testing.
Customized Nitrogen Generator for Laser Cutting Application,Low Purity Fiber Laser Cutting N2 Generator,Laser Cutting N2 Generator Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net
With the universal application of electronic glue, the application of dispensing equipment will be more extensive and diversified.
One-component dispensing technology is relatively mature, and its direction of development is automation and high precision.
In ordinary dispensers, such as some dispenser controllers, domestic imitation technology has matured, market competition is fierce, prices have plummeted, and even hundreds of machines have appeared. However, the domestic dispensing machines generally have low accuracy, and the glue is not stable enough. Some high-tech industries, when it comes to purchasing dispensing machines, can only look for world brands. Therefore, in the high-precision piece, it is still awaited by people with lofty ideals. When the market competition is fierce, only quality and service can make themselves stand out.
The automatic dispensing machine, the domestic three-axis platform, and the circumferential dispensing machine have been developed for many years. If the accuracy is only ordinary, then the domestic dispensing machine and the platform can be used. There are also many manufacturers engaged in the production and research of these single-component equipment. The market competition is fierce, but the space for excavation is still very large.
For the two-component dispensing equipment, this is an area that is far from mature: the dispensing machine can be a little bit more internationally, with more than ten thousand and several hundred thousand, which makes many manufacturers stop. However, there is still a big gap between the domestic two-liquid machine technology and the price is slightly lower. However, the product quality needs to be further improved. With the increasing use of AB glue, the requirements for gluing and other processes will be even higher. The dual liquid dispenser is another potential development area in the dispensing machine industry.