A composite hose as a cargo transfer hose is commonly used to transfer ship to shore media such as chemicals and oil products. Most of cargo operations take place between a ship and a land-based terminal. Nevertheless it sometime can be useful to transfer cargo from one ship to another in open sea and this is called a ship-to-ship operation.
Our composite hoses can be used for the following applications:
-. Chemical services: from light up to hazardous duties
-. Cryogenic services: LNG & LPG
-. Hydrocarbons: diesel, petrol and oils
-. Vapor recovery
Above mentioned hoses can be used in both onshore and offshore applications. For example tank, railcar and in-plant but also ship and barge (un)loading services.
Basic required parameters to select a cargo hose:
- Medium:
- Working pressure: 1.0 to 4.0 Mpa,
- Working temperature:-25°Ca130°C
- Nominal diameter (DN):
- Total length:
- Fitting end #1 (Fixed flange)
- Fitting end #2 (float flange)
- Material(s) fittings (Galvanized steel material or Stainless Steel)
Principal parameters:
Composite Hose Stractura
1. Flange(cs)
2. Flange connection(cs)
3. Hydraulic closed jachet (cs)
4. Air proof rubber (NBR)
5. Snap-close metal wire (brass/aluminum)
6. Inner-sheath steel wire
7. Polypropylene fabric/polester fabric
8. Fiberglas (some standard)
9. PTFE
10. Airproof layer(polypropylene)
11. Polypropylene fabric / polyester fabric
12. PVC
13. Outer-sheath steel wire(cs)
Petroleum Transfer Hose, Oil Loading/Offloading Hose, Cargo Offloading & Loading Hoses, Heavy Oil Transfer Hose Fuente International Co., Ltd. , http://www.shipssp.com
Description:
1.This production line can be used to produce corrugated pipes of PE,PP,PVC,EVA continuously,as well as PA corrugated pipes.
2.Plastic single wall corrugated pipes have features of high temperature resistance, resistant to corrosion and abrasion, high intensity, good flexibility, etc
3.They are widely used in fields of auto wire, electric thread passing pipes, circuit of machine tool, protective pipes of lamps and lanterns wire, tubes of air conditioner and washing machine, etc
PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder Machine Features:
Fully PLC controlled mahine
High and stable extrusion capacityÂ
Corrugator mould one mould two size
Good water cooling or air cooling system
Progress of PE PVC Single Wall Corrugated Pipe Extrusion Line :
Raw material + master batches→mixing→vacuum feeding →material dryness →single screw extruder→extrusion mould→corrugation forming machine→meter measurer→double winder→finished product inspecting &packing
Parameters of PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder MachineÂ
Material
Machine model
ExtruderÂ
Pipe diameter(mm)
Production speed(m/min)
PE/PP
SNDPG-25
SJ45/30
φ11mm-φ25mm
20
Â
SNDPG-63
SJ55/30
Φ25mm-φ63mm
10
Â
SNDPG-90
SJ65/30
Φ50mm-φ90mm
5
PVC
SNDPG-63
SJZ51/105
Φ25mm-φ63mm
5
Â
SNDPG-110
SJZ65/132
Φ50mm-φ110mm
3
1. This line is mainly used to process nylon, polyethylene (PE), polypropylene (PP) and PVC into small diameter single corrugated pipe.
2. Pipes are formed in one step through specialized moulds. Thus pipes are of smooth internal &Â outer surface and even corrugation.
3. The final pipes are available as protection pipe for wire and cable, drainpipe for washing machine and air-conditioner, gas hose for vacuum cleaner, and air vent, etc.
4. The Diameter of pipe is 10-50mm.
Pictures of the machine:
Product Sample of our machine
We are professional PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder Machine manufacturer factory. We locate in Zhangjiagang, Jiangsu, China, very welcome to visit us.
Any question please contact me
Mob: +86-139 1319 0110Â (Whtap/ Vber/ Telgrm/ Line/ Wecha)
Description:
1.This production line can be used to produce corrugated pipes of PE,PP,PVC,EVA continuously,as well as PA corrugated pipes.
2.Plastic single wall corrugated pipes have features of high temperature resistance, resistant to corrosion and abrasion, high intensity, good flexibility, etc
3.They are widely used in fields of auto wire, electric thread passing pipes, circuit of machine tool, protective pipes of lamps and lanterns wire, tubes of air conditioner and washing machine, etc
PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder Machine Features:
Fully PLC controlled mahine
High and stable extrusion capacityÂ
Corrugator mould one mould two size
Good water cooling or air cooling system
Progress of PE PVC Single Wall Corrugated Pipe Extrusion Line :
Raw material + master batches→mixing→vacuum feeding →material dryness →single screw extruder→extrusion mould→corrugation forming machine→meter measurer→double winder→finished product inspecting &packing
Parameters of PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder MachineÂ
Material
Machine model
ExtruderÂ
Pipe diameter(mm)
Production speed(m/min)
PE/PP
SNDPG-25
SJ45/30
φ11mm-φ25mm
20
Â
SNDPG-63
SJ55/30
Φ25mm-φ63mm
10
Â
SNDPG-90
SJ65/30
Φ50mm-φ90mm
5
PVC
SNDPG-63
SJZ51/105
Φ25mm-φ63mm
5
Â
SNDPG-110
SJZ65/132
Φ50mm-φ110mm
3
1. This line is mainly used to process nylon, polyethylene (PE), polypropylene (PP) and PVC into small diameter single corrugated pipe.
2. Pipes are formed in one step through specialized moulds. Thus pipes are of smooth internal &Â outer surface and even corrugation.
3. The final pipes are available as protection pipe for wire and cable, drainpipe for washing machine and air-conditioner, gas hose for vacuum cleaner, and air vent, etc.
4. The Diameter of pipe is 10-50mm.
Pictures of the machine:
Product Sample of our machine
We are professional PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder Machine manufacturer factory. We locate in Zhangjiagang, Jiangsu, China, very welcome to visit us.
Any question please contact me
Mob: +86-139 1319 0110Â (Whtap/ Vber/ Telgrm/ Line/ Wecha)
INNER DIAMETER
BENDING RADIUS
MAX LENGHTE
WEIGHT
WORKING PRESSURE
mm
inch
mm±10
inch
m±0.15
inch
Kg/m±1
lbs/Ft
Mpa
bar
38
1.5″
280
9.2
12
39.37
2.6
3.87
1.0-4.0
10-40
50
2″
310
10.2
12
39.37
3.5
5.21
65
2.5″
375
12.3
12
39.37
4.5
6.7
80
3″
400
13.1
12
39.37
6
8.93
100
4″
450
14.8
12
39.37
8
11.9
150
6″
560
18.4
15
49.2
12
18.9
200
8″
720
23.6
12
39.37
18
26.8
1.0- 2.5
10-25
250
10″
880
28.9
10
32.81
22
32.7
300
12″
1025
33.6
10
32.81
26
38.7
Model NO.: YRF-plastic pipe making machine
Condition: New
Belong: Extrution Line
Pipe Diameter: 8-50mm
Capacity: 18m/Min
Gearbox: Hard Teeth Face
Screw Barrel: Hard Chromed
Main Motor: Siemens Origional
Double Wall Corrugated Tube Machine: Double Wall Corrugated Tube Machine
Main Electrical Parts: Siemens Schneider
Warranty: 12months
Name: Plastic Corrugated Pipe Making Extruder Machine
Trademark: YUREFON
Transport Package: Wood Base
Specification: 19-32MM
Origin: Jiangsu China
HS Code: 84772090
Model NO.: YRF-plastic pipe making machine
Condition: New
Belong: Extrution Line
Pipe Diameter: 8-50mm
Capacity: 18m/Min
Gearbox: Hard Teeth Face
Screw Barrel: Hard Chromed
Main Motor: Siemens Origional
Double Wall Corrugated Tube Machine: Double Wall Corrugated Tube Machine
Main Electrical Parts: Siemens Schneider
Warranty: 12months
Name: Plastic Corrugated Pipe Making Extruder Machine
Trademark: YUREFON
Transport Package: Wood Base
Specification: 19-32MM
Origin: Jiangsu China
HS Code: 84772090
PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder Machine
PE HDPE PVC Plastic Pipe Corrugated Pipe Making Extruder Machine