The power car is an engine that is separately mounted on the car's ground. It is a specialized car that is used in special circumstances. When the general equipment suddenly encounters an emergency and needs to go to the scene after a long time, the generator is likely to have problems. However, the structure of the power car is relatively simple, and the efficiency of power generation is not affected by natural factors, and the cost is low and it is convenient to use. However, when using a power car, we should also pay attention to some basic common sense before we can make the power car have a longer life and use it for a longer time.

1

First, when preparing, remember to open and secure the exhaust doors on the left and right sides of the car's cabin, open the air intake door at the top of the car, and put down the hydraulic support. After laying down the load cable, connect a piece of equipment with the required load, connect the load output on the power car, ground it properly, confirm that the connection is correct and safe, and confirm that all parameters of the generator are in the normal range. such as.

Secondly, during the operation of the power car , it is necessary to check the AC current regularly. Check whether it is in a normal condition. The observed current must not exceed 10%. The voltage, oil pressure, and water temperature also need to be checked in real time to see if it is in the normal range. The generator's engine is the key structure, so check the speed and watch for any unusual noise.

Third, if you have an urgent special situation, you must quickly press the emergency button to stop the machine. When the power car is turned off, after the right control door is opened, the load switch is turned off and the stop button is pressed. Then wait for the generator's unit components to cool, then press the emergency stop switch, then remove the load of the cable once, and the uniform and complete retracted fixed cable, close all doors and windows. After doing all the work, we must remember to confirm once again whether there are any missing places.


Gantry Crane

Gantry Crane is a variation of bridge crane.Being divided into semi-gantry crane and gantry crane,the gantry crane is applicable to places without brackets,such as storage yard and plant.The maximum tonnage of Eurocrane gantry crane is 300t.The gantry crane is easy for maintenance and installation with high reliability and safety.It is able to meet the requirement of material transportation without changing the structure of plant.

Gantry Crane,Gantry Overhead Crane,Gantry Bridge Crane,Industrial Gantry Crane,Steel Gantry Crane,Gantry Crane Construction

EUROCRANE GLOBAL , https://www.euroopenwinch.com