As we all know, the mass production of industrial products and new product development are inseparable from the mold, mold is an important basic process equipment for manufacturing. Nowadays, China's mold industry is developing rapidly. China has become a big manufacturing country and is a big mold manufacturing country. In a sense, the mold is the basic industry of the national economy. The development level of the mold industry represents, in a sense, the level of industrial development of a country. More than 80% of the products in the automotive, electronics, telecommunications, aerospace and other industries that China focuses on develop are molded by the mold. Scope Mounts allow scopes sights to be attached to an air rifle or air pistol and are available in a variety of configurations and matte black. Rifle Scope Rings,30Mm Dovetail Scope Rings,30Mm Tube Scope Ring,34Mm Dovetail Scope Rings Guangzhou Miaozhun Jie Trade Co.,Ltd. , http://www.focuhunter.shop
Due to the characteristics of the mold itself, most of the modern mold companies are characterized by technology-intensive, capital-intensive, high-quality labor-intensive, and high social benefits. The mold manufacturing industry has become a part of the high-tech manufacturing industry. China's mold industry has approached the 100 billion yuan mark and has already formed a huge scale of production. Taking the mold enterprises in the Beijing area as an example, Beijing has more than 200 mold companies and can produce hundreds of thousands of molds each year. According to a leader of the Beijing Modeling Society, the industries in the automotive, electronics, and energy conservation and environmental protection sectors that are currently under development in Beijing need a lot of support from the mold industry. Of course, this will also promote the rapid development of the mold manufacturing industry in Beijing. Although the development of mold enterprises in Beijing was uneven, there were still representative companies and products such as BYD Automotive Stamping Dies, Great Wall Peony Plastic Extrusion Dies, and Kandy Puri Precision Multi-Station Progressive Dies.
Judging from the level of China's mold development in 2009, the performance of the mold industry has been as follows: the length of the large-scale progressive die has exceeded 3m, and the precision progressive die has been able to match the high-speed punch of 2000 times per minute; the hot runner mold and the gas auxiliary mold have Has reached the international level; while CAD/CAM technology has been popularized, CAE technology has been applied more and more widely, CAD/CAE/CAM integration technology has been developed, and achieved good results; new mold structure, new varieties, new technology, The innovative results of new materials are constantly emerging and the number of patents is increasing.
The multi-position progressive die and precision die represent the development direction of the stamping die, with high precision requirements and long life requirements. It is mainly composed of IT electronic information industry, semiconductor precision components, terminal connectors, and mobile phone housings. According to a person in charge of an IT mold company in Beijing, IT molds have a considerable foundation in China and have introduced advanced foreign technology and equipment. Products produced by individual companies have reached the world level, but most companies still have large gaps. The total supply is also in short supply and imports are high. Supports for ultra-large scale integrated circuits, supporting lead frames of 100 feet or more and lead gaps of 0.2 mm or less, supporting precision miniature connectors with an accuracy of 5 mm or more, supporting miniature motor cores with a diameter of 1.6 mm or less, and providing tubes and electrons And other supporting precision molds are the top priorities for development.
Relevant experts predict that in the future, the focus of the mold industry development will be to meet a large number of needs, but also have a higher technical content, especially at present the domestic can not be self-sufficient, need to import a large number of molds and can represent the direction of development of large, sophisticated, complex, long Life mold. As China’s mold products have a large price advantage in the international market, mold products with good export prospects will also become the focus of development.
The mold industry is in urgent need of talents, which is a bottleneck restricting the development of the mold industry.
According to a leader of the Beijing Modeling Association, equipment, materials, and software for the Chinese mold industry can be imported from abroad. There is no difference between them and foreign countries. If you are willing to invest, these can be the best in the world. The industry generally believes that compared with the mold industry in developed countries, the mold industry in China is truly talented, process-oriented and management-oriented. Take management, foreign advanced management, a person can operate three or four machine tools at the same time, the maximum can reach eight, high management level, high quality of personnel, can basically achieve unmanned operations. However, China's mold industry can not, because China's talent is still relatively small. A person in charge of an IT mold enterprise in Beijing believes that young people are not willing to go to the scene and are unwilling to endure hardship. In the mold processing industry, in particular, experienced engineers and technicians are required and they need a lot of practical experience. In the mold processing industry, there is a very common phenomenon, that is, some old masters, old experts, have been busy in the first line since the sixties and seventies, because companies need their valuable experience.
Many people believe in advanced production equipment and believe that as long as there are a large number of imported equipment, they can produce high-end, precision molds. Despite the fact that this is true, we also need to introduce a large number of high-end, precision machining equipment such as electric discharge machines, wire cutting machines, precision grinding machines, and machining centers from abroad. But as long as there are advanced equipment and software, we can suddenly become a mold manufacturing powerhouse. Qualified foreign talents not only can operate various machine tools, but also can design molds and write processing programs. They can find inadequacies and make improvements and modifications in the processing process. It can be said that such talents are the mold industry. The most needed talent.
At present, mold design talents and CNC machining talents have become a shortage in the talent market. As far as Dongguan City of Guangdong Province is concerned, “Dongguan City Mould Design Talent Training Project†has trained 19,563 skilled workers in Dongguan. According to the statistics of Zhitong Talent Market, in recent years, mold enterprises have purchased a large number of numerical control equipment. At the same time, they urgently need a large number of technical personnel for mold design, numerical control programming, CNC machine tool operation and maintenance. However, there is not much reserve for such talents in the talent market. It is more difficult for companies to find suitable talents in the talent market. Statistics show that only Dongguan's mold talent needs a gap of more than 50,000.
However, most of the domestic mold companies still have serious shortcomings in personnel management and personnel quality. This is also the real source of the gap between Chinese mold enterprises and developed countries. Therefore, the management system needs to be improved.
The streamlining of personnel, "lean" management, has become a mode of personnel management in developed countries. Mold enterprises in Europe and the United States and other developed countries are mostly small, with fewer employees than 100, and the number of mold companies is generally between 20 and 50. The configuration of various types of personnel in the enterprise is very streamlined, with one specialization and multiple capabilities, one person and multiple positions, and no idlers can be seen within the enterprise. The ideas of lean production and "lean" management have been well reflected.
Most mold companies in Europe and the United States are focused on the needs of various types of molds in the automotive and electronics industries, and determine their product positioning and market positioning. In order to survive and develop in the market competition, each mold manufacturer has its own superior technologies and products and adopts specialized production methods. Most mold companies in Europe and the United States have a long-term cooperation of mold users, around a large mold company and a number of mold production manufacturers. This kind of reciprocal, mutually beneficial, win-win, coexistence partnership has continued for 30 to 40 years.
In many mold enterprises in China, R&D and innovation capabilities have greatly improved, and many new technologies have also been widely used. For example, research and development and application of three-dimensional design technology, research and development of information technology management technology, development and application of two-material (color) injection molding technology, stamping and forming technology of iso-thickness welding plate, and hot-press forming technology of high-strength plate. With the attention of mold enterprises to talents and management, with the application of various new technologies in the mold industry, the mold industry will usher in a vigorous period of development.
The use of advanced management information systems to achieve integrated management has become a trend for the development of mold enterprises. Mold enterprises in Europe and the United States, especially large-scale mold companies, basically implemented computer management. From the production planning, process development, to quality inspection, inventory, statistics, etc., computers are commonly used. Various departments within the company can share information through computer networks. In China, experts have long been calling for more information and information management. However, today, most companies still lag behind in production management methods and are far from informationization and automation.
Made of high-grade aluminum and hard anodized in accordance to Mil-Spec.With a variety of shapes and sizes, from 30mm, 34mm, to 1in and tons of other options in between you're sure to find the right Rifle Scope Mounts, Rings & Bases for your tactical needs.
If the scope is to be mounted on a spring-piston or gas ram airgun, it is highly desirable that the scope mount includes an anti-recoil pin to prevent the scope from sliding off the back of the scope rail.