Product introduction
The high-voltage wireless nuclear phase meter is used for phase verification and phase sequence verification of power lines and substations. The instrument has functions such as nuclear phase, phase sequence detection, and electrical inspection. The wireless high-voltage nuclear phase meter complies with (EMC) standard requirements. Strong anti-interference, adapt to various electromagnetic field interference occasions. The high-voltage phase signal to be measured is taken out by the collector, directly transmitted after processing, and then received by the host of the nuclear phase meter and compared with the phase, and the result after the nuclear phase is qualitative. The high-pressure nuclear phase meter signal adopts wireless transmission, which is truly safe, reliable, fast and accurate, and adapts to various nuclear phase applications.
Product Features 1. Screen display content: Wireless high-voltage nuclear phase meter, different phase, in-phase, frequency, X, Y.
2. Working power supply: The host adopts rechargeable power supply, and X and Y collectors are 5 AG13 batteries.
3, can automatically shut down: 8 minutes after the boot host automatically shut down
4. The instrument will automatically alarm when it comes into contact with the measured high electric field.
Technical Specifications 1. Accuracy: In-phase error ≤ 15°, different phase error ≤ 15°
2, sampling rate 3 times / second 3, X and Y collector power supply voltage is 7.5V ± 1.5V
4, X and Y collector operating current ≤ 4mA
5. The line-of-sight distance between the host and X and Y collectors is X, Y≥25m, which can penetrate the wall and has strong anti-interference ability. 6. Working environment: -35°～ +50° Humidity: ≤95%RH
7, storage environment: -40 ° ~ +55 ° Humidity: ≤ 95% RH
8, the instrument measured voltage level is 0.38KV ~ 110KV
Instrument composition
1, an aluminum alloy box
2, wireless high-voltage nuclear phase analyzer host one
3, check the plug line
4, a power charger
5, two stretching rods
6, X, Y collector each one
7, 1.5V battery 10 section
Safety Precautions
1. When the wireless high-voltage nuclear phase meter is tested in the field, the operator should operate according to the high-voltage test safety distance standard of the power department.
2. The voltage rating of insulation rods tested by wireless high-voltage nuclear phase meter is ≤ 220KV.
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecometalsrecycling.com