Beams are an essential component of a Warp Knitting Machine. They are cylindrical rollers that hold the warp yarns in place and feed them into the machine. The beams are typically made of aluminum or steel and come in various sizes and configurations depending on the type of warp knitting machine and the specific application. Beams For Warp Knitting,Forged Warp Knitted Beam,Casted Warp Knitted Beam,Beam Flange Diameter suzhou cotex international Co.,Ltd , https://www.macanol.com
Plastic Normal Hopper Dryer
Features:
1.Stainless steel structure prevents the material from being polluted.
2.Aluminum crust, effective thermal insulating.
3.The hopper can be separated from the stand for easy cleaning .
4.The electirc heating tube is in curve shape to avoid over heat on the bottom.
5.High precision temperature controller to control temperature accurately
6.Equipped with excitation tripping overheat protection, making machine operation secure and reliable
7.Cyclone dust separator, exhaust air filter, magnetic base and blower inlet filter,hopper magnetic, storage hopper are optional.
Model List:
Â
Model No.
Hopper Capacity (kg)
Heating Power
(kw)Blower Power
(kw)Dimensions(mm)
SHD-25
25
3
0.12
760*420*851
SHD-50
50
4.5
0.18
860*500*920
SHD-75
75
6
0.3
940*540*1140
SHD-100
100
6
0.3
1050*640*1235
SHD-150
150
9
0.4
1075*700*1400
SHD-200
200
11
0.4
1210*750*1500
SHD-300
300
15
0.5
1220*800*1630
SHD-400
400
15
0.5
1450*940*1800
Â
The beams are mounted on the machine's creel and are loaded with warp yarns. As the machine operates, the beams rotate, and the yarns are drawn through the needles and knitted into a fabric. The speed and tension of the beams are carefully controlled to ensure that the yarns are fed into the machine at a consistent rate, resulting in a uniform and high-quality fabric.
Different types of beams are used for different types of warp knitting machines. For example, a warp knitting machine used for producing lace fabrics may require smaller and lighter beams, while a machine used for producing heavy-duty fabrics may require larger and heavier beams.
In addition to holding the warp yarns, the beams may also be equipped with sensors and other devices to monitor and control the tension and speed of the yarns. This helps to ensure that the fabric is produced to the desired specifications and that the machine operates efficiently and reliably.