Samples of laboratory samples are typically taken. Applicable to: the case where the exposed surface of the ore body is small and there are many sampling points. (2) Peeling method → ​​A layer of (10-20 cm) ore crumb is peeled off from the surface of the outcrop of the ore body as a sample. Features: large range and low efficiency. Applies: precious metals, precious metals and non-uniform distribution of ore and ore thin sample. (3) Blasting method → ​​On the two walls or the top plate of the tunnel, the shots are shot according to the predetermined specifications, and all or part of the blasted ore is taken as a sample. Applicable to: large sampling volume, uneven distribution of ore grade, mostly industrial test samples. (4) Drilling core extraction method → ​​Take 1/2 or 1/4 of the borehole core of the core drill of the geological department as a sample. The core taken should pass through the entire thickness of the ore body and be drawn along the centerline. Suitable for: laboratory sampling with small sample size.
Tire Seal
Tire seal repairs small injuries in tubeless tires quickly and easily. It flows into the injury and completely seals the inner liner as well as broken cord and cable ends. Seal insert permanently vulcanizes through the tire injury, and the tire is immediately ready for use.
Tire Seal,Brown Tire Seal,Rubber Tire Seal,Tire Repair Seal String Ningbo Heyu Tire Repairs Co., Ltd. , https://www.auto-repairs-tools.com
(1) Grooving method → ​​engrave in a certain proportion according to the direction in which the ore property changes most.