• Model NO.: ZYYX
  • Forging Forming Method: Cold Roll Forming
  • Feature: Automation
  • Warranty: 12 Months
  • Advantage: Use Widely
  • Whole Line Size: 105*25*7m
  • Machine Color: Made-to-Order
  • Total Length: About 35m
  • Panel Apply: Roof or Wall
  • Certificate: ISO,CE
  • Trademark: zhongyuan
  • Origin: China
  • Type: Rolling Machine
  • Power Source: Electric
  • Certification: ISO9001, CE
  • Customized: Customized
  • Condition: New
  • Brand Name: Zhongyuan
  • Control Mode: Mitsubishi PLC & Converter
  • Machine Usage: EPS Sandwich Panel Making
  • Panel Width: 1000mm
  • Name: EPS Sandwich Panel Forming Machine
  • Specification: CE SGS BV
  • HS Code: 84552210
EPS sandwich panel forming machine

Function of machine
EPS sandwich panel forming machine can product EPS sandwich panel used as roof and wall automatically and continuously.


Technical Specifications:

1. Sandwich Panel Spec.
Panel width 1000mm
Panel thickness Mini thickness: 40mm (corrugated sandwich panel)
50mm (wall panel)
Max. Thickness: 150mm(exclude corrugated sandwich panel)

2. Steel Sheet Spec
Thickness 0.4-0.8mm color steel sheet
Width 1250mm
Max. Coil weight 5tons
Inner Dia. Of coil 508mm, 610mm

3. Whole Line Spec
Working speed max. 3-5m/min (adjustable)
Total length about 35m
Control mode PLC
Power required 380V/3phase/50Hz or as per customer's requirement.
Machine with CE certificate.


Data sheet

Sandwich Panel Spec
 
Panel width                1000mm  (according to profile requirement)
Panel thickness Mini thickness: 
40mm (corrugated sandwich panel)
50mm (wall panel)
Max. thickness:
150mm (exclude corrugated sandwich panel)

Steel Sheet Spec (we can design as per buyer's special requirement )
 
Thickness 0.4-0.8mm color steel sheet
Width 1250mm
Max. coil weight 5tons
Inner Dia. of coil 508mm, 610mm

Whole Line Spec
 
Working speed  Max.5m/min (adjustable)
Total length about 35m
Control mode Misubishi PLC
Total power about 45Kw
Power required  380V/3phase/50Hz or as per customers requirement

Components
 
Manual decoiler
consecutive laminating body 
pre-heat system
glue providing 
heater
PLC control system


For further information please contract with us. We can design machine according to customer's requirement.

Vacuum Forming Car Parts

Vacuum forming is a manufacturing process used to create car parts by heating a plastic sheet and then stretching it over a mold using vacuum pressure.


You may probably find the automotive industry is the most made by vacuum forming,both for comsumer and commercial vehicles,trucks, and buses.Usually the vacuum forming car parts contain:Front bumper, rear bumper, ceiling, roof luggage compartment, wheel arches, doors, tailgate padding, dashboard, fenders, car logo, and interior and exterior plastic decorations.


In addition, the plastic trays which are used for the transportation of the engine block and cylinder also was made by vacuum forming.


Vacuum Forming Car Parts,Vacuum Forming Auto Parts,Thermoforming Car Parts,Thermoforming Auto Carts

Dongguan Yiyongli Industrial Co.,Ltd. , https://www.dgthermoforming.com