At ordinary times when our advertising vehicles are in operation, hand brakes need to be used more or less. However, how to use them properly is a technical problem. If it is not handled properly, it may cause danger. Usually in the operation, many drivers will have many misunderstandings.
Because our advertising vehicle does not play too fast for the advertising effect, especially in the crowded streets or downtown, the speed is very slow. We often need to use brakes. However, when we work, we sometimes find a place for fixed-point communication. But sometimes, in order to maintain stability to prevent traffic accidents caused by cradles on the slope, many car owners think that the tighter the better the mobile video propaganda vehicle is. However, it is not so true that the handbrake cable is made from year-round for a long time and the handbrake is pulled up with great force to make the handbrake cable deformed by overstretching or stretching for a long time so as to shorten its service life.
And, when we park our advertising vehicles, we usually stop at a flat area as much as possible. If we stop on a slope with a slope, we can put a brick or stone in the rear wheel to reduce the bearing weight and workload of the handbrake.
At the same time, you should pay attention when using a handbrake at high speeds. When driving on a high speed, if you encounter a flat tire, do not use the handbrake brake. If you use it, you may cause the rear wheel to lock up and cause the car to turn over. The correct way is to hold the steering wheel if a flat tire suddenly occurs. Decelerating our advertising vehicles through gears.
Article Source: http://
Sales Hotline: 0722-7028566
Contact: Manager Wu
Contact Tel: 18871139605
LED advertising vehicle: http://
Advertising vehicle: http://
Led advertising car: http://
Brazed heat exchangers corrugated plates create multiple flow channels, maximizing the heat transfer surface area within a small footprint. This makes them ideal for applications where space is limited.
Brazed heat exchanger (BPHE) is a type of compact heat exchanger that consists of corrugated metal plates that are brazed together to form a single unit. The brazing process involves melting a filler material, tipically copper-based alloy (
Stainless or Nickle are available) between the plates to create a strong and leak-proof joint.
The main advantages of brazed heat exchangers include their high heat transfer efficiency, compact size, and reliability.The basic flow principle in a brazed plate heat exchanger is parallel to achieve the most efficient heat transfer process.In a single pass design, all connections are located on one side of the heat exchanger, making installation very easy.
The flow principle of a brazed heat exchanger is based on the counter-current flow configuration, where the two fluids involved in the heat transfer process flow in opposite directions. e.g the picture A and B
Brazed Plate Heat Exchanger,Brazed Heat Exchanger,Refrigeration Oil Cooler Evaporator,Brazing Heat Exchanger
Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodehex.com