1.5 Ton Electric Straddle Stacker
Zowell XEK15 1.5 ton electric straddle
stacker is standard with adjustable fork. It is a ideal forklift for both single
and double faced pallets. It is more easy to operate and
widely used in the food, medicine, tobacco, textile and car manufacturing
industry. It is the best choice for the customer who needs the short length and
high lift capacity. Combined with the powerful components and first class spare
parts make sure the electric reach stacker have best performance. As
an ideal choice to operate in narrow space of warehouse, it can be widely used
in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries,
as well as ports, railways, freight yards, warehouses.
Compared with the traditional manual stacking,
Zowell full Electric Stacker maintains great advantages in safety, efficiency
and cost. In addition to durability and accuracy both outside and inside,
Zowell XE electric stackers are also equipped with mast with clear view, double
speed and lateral vertical moving switch, which are valuable when working in
limited space.
If you need bigger capacity or other
customized options such as rod, low mast, grabbling frame, please contact us so
that we can provide you best solution with professional knowledge.
Electric Straddle Stacker, Wide fork leg stacker, Straddle Stacker, Electric Straddle Forklift Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com
The tighter the bolt, the better. There are many fasteners on the car that are connected by bolts and nuts. It should be ensured that it has enough pre-tightening force, but it cannot be tightened too tightly. If the tightening is too tight, on the one hand, the connection member will be permanently deformed under the action of external force; on the other hand, the bolt will be permanently deformed by tension, the pre-tightening force will be reduced, and even a sliding buckle or breaking phenomenon will occur.
The tighter the drive belt, the better the water pump and generator of the automobile engine are driven by the V-belt. If the belt is tightened too tightly and easily deformed, the pulleys and bearings are liable to cause bending and damage. The belt tension should generally be adjusted so that when the belt is pressed in the middle, the amount of sinking is preferably 3% to 5% of the center distance of the pulleys at both ends.
The more the oil, the better. If there is too much oil, the crankshaft shank and connecting rod will stir violently when the engine is working, which will not only increase the internal power loss of the engine, but also increase the oil that splashes on the cylinder wall, resulting in the burning of the oil malfunction.
Therefore, the amount of oil should be controlled between the upper and lower mark lines of the oil dipstick.
Occasionally using a low-grade oil does not have to use a low-grade oil once, which may cause permanent damage to the engine. Low-grade oil has poor wearability, is easily oxidized and acidified, and has strong corrosion. It can easily leave carbon deposits and sludge in the engine and clog filters and oil passages.
Cars are becoming more and more popular and new drivers are constantly joining. However, many drivers do not understand the car, but there are many errors in driving. We will ask experts to solve the misunderstandings one by one.