The ordinary drawer hardware, because half of casement drawer is open, the other half outside the drawer sash is open, so the form of seal is hard to realize.To achieve the same as the pure inside or outside the drawer the sealing effect, turn over the drawer of the cost would be relatively high.Turn ordinary drawer hardware accessories mainly two axis of rotation, and equipped with corresponding lock and handle.One can turn 360 degrees international integrated hardware fittings, the purpose is to achieve good sealing effect and easy to clean drawers. Drawer Hardware,Zinc Die Casting Drawer Hardware,Zinc Die Casting Drawer Handle,Chrome Plating Drawer Parts NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.aldiecastings.com
Specially suitable for no-spatter welding of carbon steel wire and stainless steel wire
Support MMA welding, DC MAG welding, single-pulse MIG welding, and double-pulse MIG welding.
Soft-switch inverter technology, DSP all-digital control, LCD menu and function display, can be used with robot
with welding expert database inside, can save 30 sets of parameters
Automatic protection from over-current, over/under-voltage and over temperature
with all-closed grating feedback four-wheel double-driving wire feeder
Double-pulse MIG welding greatly decreased the technical requirements for welders and the labor intensity of welders. Every fish-scale fatten can form automatically and evenly and the size of fish-scale fatten can be controlled
Â
Content            Model
DSP-315
DSP-400
DSP-500
Function model:
DSP-315DT-2Function model:
DSP-400DT-2Function model:
DSP500DT-2
Power
3-phase 380/415V 50/60HZ
Rated input current
18.6A
25.8A
35A
Rated input capacity
12.2KVA
17KVA
23KVA
Rated welding current/voltage
315A/32.6V
400A/34V
500A/39V
Welding current
315AÂ 60%DE
400AÂ 60%DE
500AÂ 60%DE
250AÂ 100%DE
315AÂ 100%DE
400AÂ 100%DE
No-load voltage(MAX)
65V
65V
73V
Adjust. Â Range
of welding current.40-315A
40-400A
40-500A
Mixing ratio of double pulse
0-10HZ
Efficiency
85%
Power Factor
> 0.95
Pre-gas sending time
0-1S
Post-gas sending time
0-10S
Suitable wire
Φ 0.8-Φ 1.6mm stainless steel wire or carbon wire
Cooling type of torch
Water
Protection gas
97.5%Ar2+2.5%CO2 or 98%Ar2+2%O2 for carbon steel wire or stainless steel wireÂ
Specially suitable for no-spatter welding of carbon steel wire and stainless steel wire
Support MMA welding, DC MAG welding, single-pulse MIG welding, and double-pulse MIG welding.
Soft-switch inverter technology, DSP all-digital control, LCD menu and function display, can be used with robot
with welding expert database inside, can save 30 sets of parameters
Automatic protection from over-current, over/under-voltage and over temperature
with all-closed grating feedback four-wheel double-driving wire feeder
Double-pulse MIG welding greatly decreased the technical requirements for welders and the labor intensity of welders. Every fish-scale fatten can form automatically and evenly and the size of fish-scale fatten can be controlled
Â
Content            Model
DSP-315
DSP-400
DSP-500
Function model:
DSP-315DT-2Function model:
DSP-400DT-2Function model:
DSP500DT-2
Power
3-phase 380/415V 50/60HZ
Rated input current
18.6A
25.8A
35A
Rated input capacity
12.2KVA
17KVA
23KVA
Rated welding current/voltage
315A/32.6V
400A/34V
500A/39V
Welding current
315AÂ 60%DE
400AÂ 60%DE
500AÂ 60%DE
250AÂ 100%DE
315AÂ 100%DE
400AÂ 100%DE
No-load voltage(MAX)
65V
65V
73V
Adjust. Â Range
of welding current.40-315A
40-400A
40-500A
Mixing ratio of double pulse
0-10HZ
Efficiency
85%
Power Factor
> 0.95
Pre-gas sending time
0-1S
Post-gas sending time
0-10S
Suitable wire
Φ 0.8-Φ 1.6mm stainless steel wire or carbon wire
Cooling type of torch
Water
Protection gas
97.5%Ar2+2.5%CO2 or 98%Ar2+2%O2 for carbon steel wire or stainless steel wireÂ
Model NO.: DT-2 Series
HS Code: 8515219000
Model NO.: DT-2 Series
HS Code: 8515219000
Main Features