Plasticizers are bulk industrial products and are widely used in various fields of the national economy, including thousands of products such as plastics, rubber, adhesives, cellulose, resins, medical equipment, and cables.
DOP, DINP, DOTP, ESO, DOA Henan Chuange Industry CO.,LTD , https://www.chuangegroup.com
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate & go! !
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Catain One Step Tyre Sealant & Inflator
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate & go! !
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Model NO.: ID-309
HS Code: 35069190
Model NO.: ID-309
HS Code: 35069190
Catain One Step Tyre Sealant & Inflator