Model NO.: CW6636x2000
Automatic Grade: Semiautomatic
Setting Mode: Floor-type
Precision: Precision
Certification: CE, ISO 9001
Condition: New
max. swing diameter: 1000mm
Max Workpiece Weight: 6000kgs
center distance: 2000mm
Trademark: HAVEN
Transport Package: Wooden Pallet
Specification: CW6636X2000
Origin: China
HS Code: 84581900
Model NO.: CW6636x2000
Automatic Grade: Semiautomatic
Setting Mode: Floor-type
Precision: Precision
Certification: CE, ISO 9001
Condition: New
max. swing diameter: 1000mm
Max Workpiece Weight: 6000kgs
center distance: 2000mm
Trademark: HAVEN
Transport Package: Wooden Pallet
Specification: CW6636X2000
Origin: China
HS Code: 84581900
CW6636X2000 Oil Country Lathe Machine
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000

Main feature:
1. Bed
The bed is a basic component of the machine, and its rigidity directly affects working performance and accuracy of the whole machine. The bed are made by the press of resin sand mould and the materials of high quality iron casting and this has excellent exterior and strength. The bed also has features of strong rigidity, anti-shock ability and anti-section deformity ability because of the construct of -typed ribs and the process of 450 side and rear chip removal. Width of guide-ways is 600 mm, this dimension is very bigger, and it has a better anti-subversive capacity when cutting large-sized swiveling work-pieces. The bed has V-typed and flat guide-ways for longitudinal traverse of the apron and tailstock.
2. Spindle box
The spindle box is a construction of whole box. The movement of main motor will be transmitted into the spindle box through V-belt. The change of moveable gear is adjusted by control handle, the range of spindle speed is 5 to 315 r/min. The transmits of main drive has two advanced roads, which is separated for high speed and low speed, so wide range of spindle variable-speed is realized economically and effectively. This driving system has characters of big torque output
3. Tailstock
The tailstock is consisted of up and lower bodies. The sleeve, spindle, manual and rapid traverse mechanism for sleeve, and adjusting spindle center line mechanism of the tailstock are wholly installed in the up body, the stopping mechanism is installed in the lower body. The tailstock can do longitudinal traverse along the guide-way of the bed, and it can support all kinds of work-pieces, and mechanical locking fastness will be realized, it is safer and more reliable.
4. Saddle and tool post
Main functions of this part by the frame of reference of the spindle finish various kind of feed. To prevent the feed of saddle from climbing longitudinally, a pair of guide-ways of the saddle has stuck with plastic guiding plates of high performance, the problem for cross and longitudinal combinational traverse has thoroughly been solved in the construction of longitudinal and cross branch, reliability of the machine is raised greatly. In additional, the up tool post can cut different taper within the effective travel.
5. Taper turning device
This device is installed at the end of the saddle, it can drive the saddle and tool post to turn taper ≤ 20° , length of the taper ≤ 300 mm, so it can turn pipe threads conveniently and reliably. Also this device with the length 800mm can be equipped with.
6. Feeding device (Out board support)
In order to clamp the pipe conveniently, the feeding device is installed in the saddle, and a handle is set on it. When moving the handle with hand, this pipe can go from chuck to rear chuck through the spindle hole automatically, easy for clamping the pipe, at mean time, the pipe which has been machined may be unloaded from the front or rear chuck, the device can be selected more according to the length of this pipe. This device has function as roller supporting, it can support long pipe.

Main specification:
Model CW6628 CW6636 CW6646
Max swing over bed 1000mm 1000mm 1200mm
Max swing over carriage 640mm 640mm 900mm
Distance between center 1500-16000mm
Width of bed 600mm 755mm 970mm
Dia of spindle inner hole 280mm 360mm 460mm
Min clampe dia of chuck 50mm 200mm 250mm
Range of spindle speed 5 to 500r.p.m 3.15 to 315 r.p.m.  
Kind of metric thread and pitch range 56 kinds  1 to 120 mm  
Kind of Whitworth thread and range 37 kinds30 to 1.125 teeth/in.  
Kind of modular thread and range 46 kinds  0.5 to 60 mm  
Kind of radial thread and range 46kinds  0.5 to 60 D.P.  
Tool section ( H×W ) 32X32mm 45×45 mm 45×45 mm
Max. travel of tool post 200 mm 200 mm 200 mm
Max. travel of cross slide 600mm 520 mm 620
Diameter of tailstock sleeve 120mm 160 mm 160mm
Travel of tailstock sleeve 250mm 300 mm 300 mm
Taper for taper hole of tailstock sleeve Morse No.6 Metric No. 80 Metric No. 80
Machining length of taper scale Taper turning, ±1:4
Main motor AC18.5KW AC22KW AC30KW
CW6636X2000 Oil Country Lathe Machine
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000
Hollow Spindle Oil Country Lathes Tube Turn Lathe Machine CW6636X2000

Main feature:
1. Bed
The bed is a basic component of the machine, and its rigidity directly affects working performance and accuracy of the whole machine. The bed are made by the press of resin sand mould and the materials of high quality iron casting and this has excellent exterior and strength. The bed also has features of strong rigidity, anti-shock ability and anti-section deformity ability because of the construct of -typed ribs and the process of 450 side and rear chip removal. Width of guide-ways is 600 mm, this dimension is very bigger, and it has a better anti-subversive capacity when cutting large-sized swiveling work-pieces. The bed has V-typed and flat guide-ways for longitudinal traverse of the apron and tailstock.
2. Spindle box
The spindle box is a construction of whole box. The movement of main motor will be transmitted into the spindle box through V-belt. The change of moveable gear is adjusted by control handle, the range of spindle speed is 5 to 315 r/min. The transmits of main drive has two advanced roads, which is separated for high speed and low speed, so wide range of spindle variable-speed is realized economically and effectively. This driving system has characters of big torque output
3. Tailstock
The tailstock is consisted of up and lower bodies. The sleeve, spindle, manual and rapid traverse mechanism for sleeve, and adjusting spindle center line mechanism of the tailstock are wholly installed in the up body, the stopping mechanism is installed in the lower body. The tailstock can do longitudinal traverse along the guide-way of the bed, and it can support all kinds of work-pieces, and mechanical locking fastness will be realized, it is safer and more reliable.
4. Saddle and tool post
Main functions of this part by the frame of reference of the spindle finish various kind of feed. To prevent the feed of saddle from climbing longitudinally, a pair of guide-ways of the saddle has stuck with plastic guiding plates of high performance, the problem for cross and longitudinal combinational traverse has thoroughly been solved in the construction of longitudinal and cross branch, reliability of the machine is raised greatly. In additional, the up tool post can cut different taper within the effective travel.
5. Taper turning device
This device is installed at the end of the saddle, it can drive the saddle and tool post to turn taper ≤ 20° , length of the taper ≤ 300 mm, so it can turn pipe threads conveniently and reliably. Also this device with the length 800mm can be equipped with.
6. Feeding device (Out board support)
In order to clamp the pipe conveniently, the feeding device is installed in the saddle, and a handle is set on it. When moving the handle with hand, this pipe can go from chuck to rear chuck through the spindle hole automatically, easy for clamping the pipe, at mean time, the pipe which has been machined may be unloaded from the front or rear chuck, the device can be selected more according to the length of this pipe. This device has function as roller supporting, it can support long pipe.

Main specification:
Model CW6628 CW6636 CW6646
Max swing over bed 1000mm 1000mm 1200mm
Max swing over carriage 640mm 640mm 900mm
Distance between center 1500-16000mm
Width of bed 600mm 755mm 970mm
Dia of spindle inner hole 280mm 360mm 460mm
Min clampe dia of chuck 50mm 200mm 250mm
Range of spindle speed 5 to 500r.p.m 3.15 to 315 r.p.m.  
Kind of metric thread and pitch range 56 kinds  1 to 120 mm  
Kind of Whitworth thread and range 37 kinds30 to 1.125 teeth/in.  
Kind of modular thread and range 46 kinds  0.5 to 60 mm  
Kind of radial thread and range 46kinds  0.5 to 60 D.P.  
Tool section ( H×W ) 32X32mm 45×45 mm 45×45 mm
Max. travel of tool post 200 mm 200 mm 200 mm
Max. travel of cross slide 600mm 520 mm 620
Diameter of tailstock sleeve 120mm 160 mm 160mm
Travel of tailstock sleeve 250mm 300 mm 300 mm
Taper for taper hole of tailstock sleeve Morse No.6 Metric No. 80 Metric No. 80
Machining length of taper scale Taper turning, ±1:4
Main motor AC18.5KW AC22KW AC30KW

Plastic Injection Mould

Intertech Machinery Inc. , https://www.taiwanmouldmaker.com